Product ID:ANTI-LEAK HYDRAULIC OIL 1184
MSDS Date:04/01/1990
FSC:9150
NIIN:00N012171
MSDS Number: BJJCC

Emergency Phone: 201-344-3451

Info Phone: 201-344-3451

Cage: 76736

Telephone: 201-344-3451/800-424-9300(CHEMTREC)

Cage: 76736

SEVERELY HYDROTREATED PETROLEUM HYDROCARBON BASE STOCK.

CAS: 64742-58-1

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OR REPEATED SKIN CONTACT
TENDS TO REMOVE SKIN OILS AND MAY CAUSE SKIN IRRITATION. EXPOSURE
TO FUMES OR MISTS MAY CAUSE MUCOUS MEMBRANE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:MILD IRRITATION OF SKIN AND MUCOUS MEMBRANE.

First Aid:SKIN:WIPE OFF AND WASH WITH SOAP AND WATER. EYE:FLUSH WITH
COPIOUS AMOUNTS OF WATER AND GET MD. INHAL:REMOVE FROM EXPOSURE TO
FRESH AIR. INGEST:ADMINISTER WATER AND GET MD.

Flash Point Method:COC
Flash Point:350F,177C
Lower Limits:1%
Upper Limits:7%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM & WATER FOG (CAREFULLY TO
PREVENT FROTHING).
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA WITH FACE SHIELD
AND FULL PROTECTIVE EQUIPMENT IN ENCLOSED AREAS.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:STOP FLOW. ELIMINATE IGNITION SOURCE. RECOVER
FREE PRODUCT. ADD ABSORBENT MATERIAL SUCH AS CLAY TO SPILL AREA.
SWEEP OR SCRAPE UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CNTRS CLOSED.HANDLE/STORE USING
METHODS GENERALLY ADVOCATED FOR PETROLEUM PRODS.DO NOT STORE OR MIX
W/OXIDIZING MATLS.AVOID EXCESSIVE HEAT/FLAMES
Other Precautions:AVOID REPEATED CONTACT WITH SKIN.AVOID CONTACT WITH
EYES AND INHALATION OF FUMES, VAPORS, OR MISTS. DON'T INGEST. WASH
THOROUGHLY AFTER HANDLING.

Respiratory Protection:NORMALLY NOT REQUIRED. RECOMMENDED IF FUMING OR
MISTING. USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN.
Ventilation:LOCAL EXHAUST RECOMMENDED TO CAPTURE HOT FUMES. MECHANICAL
(GENERAL) VENTILATION RECOMMENDED IF FUMING OR MISTING.
Protective Gloves:FOR PRLNGD/FREQUENT RPTD CONTACT.
Eye Protection:CHEMICAL WORKERS GOGGLES.
Other Protective Equipment:NORMALLY NOT REQUIRED.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR DRINKING. DO NOT
WEAR CONTAMINATED CLOTHING. REMOVE AND LAUNDER BEFORE RE-USE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:V6
Boiling Pt:B.P. Text:500F,260C
Vapor Pres:<0.01
Vapor Density:>1
Spec Gravity:0.9
Evaporation Rate & Reference:<0.01 (BUTYL ACETATE = 1)
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER LIQUID. CHARACTERISTIC PETROLEUM ODOR.

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT AND OPEN FLAMES.
Hazardous Decomposition Products:OXIDES OF CARBON MAY FORM ON
INCOMPLETE COMBUSTION.

Waste Disposal Methods:DISPOSE OF AS LOCAL LAWS PERMIT FOR PETROLEUM
HYDROCARBONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.